Saramonic SoundBird T3 Directional Condenser Microphone
- -10dB Pad
Attenuates the microphone input to allow for the recording of loud sounds without clipping.
- 150 Hz High Pass Filter
Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording.
- High Frequency Boost
Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech.
- Rechargeable Built-in Li-ion Battery
The built-in battery supports at least 150 hours operation.
- Solid Brass Construction
Prevents radio frequency interference for clean sound
- Gold-Plated XLR Connector
Resists corrosion and ensures excellent signal transfer
- Battery Indicator
If you would like to check the battery level during recording, double press the Power button, the 4 indicators will show the remaining battery capacity. If 4 indicators are all blue, the battery is full.
Supplied with foam windshield, mic clip and shock mount, XLR Cable and MicroUSB charging cable
المواصفات
| الماركة | Saramonic |
| رقم الموديل | SoundBird T3 |
| النوع | اكسسوار |
| اللون | اسود |
| الوزن | 0.24 kg |
| Directional Pattern |
Cardioid |
| Frequency Range |
75 to 20k Hz (selectable HPF 150 Hz) |
| Sensitivity |
-38 ± 3dB(OdB=1 V/Pa |
| at 1 kH 1.5V 2.2K) |
|
| Output Impedance |
150ohm |
| Dynamic Range |
125 dB (per IEC651) |
| Maximum SPL |
f=1KHzTHD 1% 105 dB |
| Signal to Noise Ratio |
80 dB SPL(per IEC651) |
| high pass filter button |
150 Hz |
| high frequency boost |
+6 dB |
| PAD |
-10 dB |
| Material |
Brass |
| Output Connection |
3-pin XLR balanced output between Pin 2 (+) Pin 3 (-) and Pin 1 (ground) |
| Power |
48V phantom power built-in lithium battery (battery life |
| أبعاد الحزمة (W, H, L ) سم | 28.2 x 2.21 x 2.21 |
| الضمان | 1 year warranty |
| SKU | HS019199 |
© 2023 شوبكيس. جميع الحقوق محفوظة.
مدعوم من جليكس
مدعوم من جليكس
